Home OFFICIAL ROM Download & Install MIUI ROM for Xiaomi Mi 10 Lite Zoom –...

Download & Install MIUI ROM for Xiaomi Mi 10 Lite Zoom – All MIUI firmwares

5
ROM for Xiaomi Mi 10 Lite Zoom

If you are a user of the Xiaomi Mi 10 Lite Zoom phones, or you are planning to purchase the device then you should download the official MIUI ROM for Xiaomi Mi 10 Lite Zoom that will you help to upgrade or downgrade your Xiaomi smartphone.

After you install the firmware on your phone, you can experience a lot of new features, In this post, you can download Xiaomi Mi 10 Lite Zoom Update and install it manually just complete the process and your Xiaomi device is now running on the official firmware.

Notice: Flashxiaomi not responsible for any damage to your Xiaomi Mi 10 Lite Zoom if you don’t follow the steps correctly otherwise you may brick your device.

Xiaomi Mi 10 Lite Zoom Specs

Release date 2020, April
Dimensions (mm) 164 x 74.8 x 7.9 mm
Screen size (inches) 6.57 inches
Resolution 1080 x 2400 pixels
Android OS Android 10
Chipset Qualcomm SDM765 Snapdragon 765G
Processor Octa-core 1×2.4 GHz & 1×2.2 GHz & 6×1.8 GHz
RAM 6/8 GB RAM
ROM 128/256 GB
Back Camera Quad 48 MP, f/1.8 + 8 MP, f/2.4 + 8 MP, f/2.2 + 2 MP, f/2.4
Front Camera 16 MP, wide
Battery Non-removable Li-Po 4160 mAh

The ROM files on this page are the official ROM published by Xiaomi. All stock Firmware fit only for your Xiaomi Mi 10 Lite Zoom mobile. Do not use this firmware on any other Xiaomi devices.

The Flash Process will take a few minutes. so please make sure your device has at least 50% Battery.

How to Flash XIAOMI Stock Firmware – All Methods

Instructions

Download Xiaomi Mi Flash Tool All Versions – Official Mi Flash Tool

Download & Install MIUI ROM for Xiaomi Mi 10 Lite Zoom – All MIUI firmwares:

China Stable ROM For Xiaomi Mi 10 Lite Zoom

Download MIUI 12.0.4.0 China Stable ROM

  • Download MIUI 12.0.4.0 Recovery ROM:

Download

  • Download MIUI 12.0.4.0 Fastboot ROM:

Download


Download MIUI 12.0.3.0 China Stable ROM

  • Download MIUI 12.0.3.0 Recovery ROM:

Download

  • Download MIUI 12.0.3.0 Fastboot ROM:

Download


Download MIUI 11.0.10.0 China Stable ROM

  • Download MIUI 11.0.10.0 Recovery ROM:

Download

  • Download MIUI 11.0.10.0 Fastboot ROM:

Download


Download MIUI 11.0.9.0 China Stable ROM

  • Download MIUI 11.0.9.0 Recovery ROM:

Download

  • Download MIUI 11.0.9.0 Fastboot ROM:

Download


Download MIUI 11.0.6.0 China Stable ROM

  • Download MIUI 11.0.6.0 Recovery ROM:

Download

  • Download MIUI 11.0.6.0 Fastboot ROM:

Download


If you’re facing any kind of Problem With the flashing process, then let us know in Comment below.

Read more: Download & Install MIUI ROM for Xiaomi Mi Note 10 Lite – All MIUI

5 COMMENTS

  1. Hi,

    Perhaps you guys can assist me with this issue I have with my Mi 10 Lite Youth Edition/Zoom I recently got from China
    The seller installed a EEA Global ROM on it but ended up breaking the Xiaomi Camera only because the global software was not meant or the ZOOM Edition, only the Global Chinese ROM would work and that’s what I am trying to install, but ended up locking the bootloader and the phone is now stuck in Mi Recovery not sure what to do I can’t unlock the bootloader and when I try to flash the correct image via MiFlash I get a error message that says (mismatching image and device) every time this happens!
    I am out of idea and desperately need help and my device up and running again!

    Thanks in advance
    M

    • Unzip the ROM files
      open flash_all.bat with notepad

      delete these two lines:

      rem fastboot %* getvar product 2>&1 | findstr /r /c:”^product: *MSM8953″ || fastboot %* getvar product 2>&1 | findstr /r /c:”^product: *mido” || echo Missmatching image and device
      rem fastboot %* getvar product 2>&1 | findstr /r /c:”^product: *MSM8953″ || fastboot %* getvar product 2>&1 | findstr /r /c:”^product: *mido” || exit /B 1

      save files and try flashing again.

        • Unzip the ROM files
          open flash_all.bat with notepad

          delete these two lines:

          rem fastboot %* getvar product 2>&1 | findstr /r /c:”^product: *MSM8953″ || fastboot %* getvar product 2>&1 | findstr /r /c:”^product: *mido” || echo Missmatching image and device
          rem fastboot %* getvar product 2>&1 | findstr /r /c:”^product: *MSM8953″ || fastboot %* getvar product 2>&1 | findstr /r /c:”^product: *mido” || exit /B 1

          save files and try flashing again.

LEAVE A REPLY

Please enter your comment!
Please enter your name here