Download & Install MIUI ROM for Xiaomi Mi Pad 2

Looking to update your Xiaomi Mi Pad 2? Installing an MIUI ROM is a great way to get the latest features & improvements. you can Download & Install MIUI ROM for Xiaomi Mi Pad 2.

Xiaomi Mi Pad 2 owners can now download and install the official MIUI ROM for their phones. This firmware update brings a number of new features and improvements to the Mi Pad 2 device.

Notice: Flashxiaomi not responsible for any damage to your Xiaomi Mi Pad 2 if you don’t Follow the steps correctly otherwise you may brick your device.

Xiaomi Mi Pad 2 Specs

  • Release date:2015, November
  • Dimensions (mm):200.4 x 132.6 x 7 mm
  • Screen size (inches):7.90 inches
  • Resolution:1536 x 2048 pixels
  • Android OS:Android 5.1 Lollipop
  • Chipset:Intel Atom X5-Z8500
  • Processor:Quad-core 2.24 GHz
  • RAM:2 GB RAM
  • ROM:16/64 GB
  • Back Camera:8 MP, f/2.0
  • Front Camera:5 MP
  • Battery:Non-removable Li-Po 6190 mAh

The ROM files on this page are the official ROM published by Xiaomi. All stock Firmware fit only for your Xiaomi Mi Pad 2 mobile. Do not use this firmware on any other Xiaomi devices.

The Flash Process will take a few minutes. so please make sure your device has at least 50% Battery.

Instructions

How to Flash XIAOMI Stock Firmware – All Methods

Download Xiaomi Mi Flash Tool All Versions – Official Mi Flash Tool

Download & Install MIUI ROM for Xiaomi Mi Pad 2 – All MIUI firmwares:


China Stable ROM For Xiaomi Mi Pad 2

Download MIUI 9.6.2.0 China Stable ROM

Download MIUI 9.6.1.0 China Stable ROM 


If you’re facing any kind of Problem With the flashing process, then let us know in Comment below.

Read more: Download And Install Xiaomi Mi Pad 2 USB Driver For Windows

Share on:
About youssef abouza

Youssef, 31 years, I'm living in Morocco, I like traveling, watch Series, technology news, Phones, Android, IOS & PC.

5 thoughts on “Download & Install MIUI ROM for Xiaomi Mi Pad 2”

  1. Hi Youssef,

    My MiPad 2 is completely Dead. I’m trying to recover it. But on connecting to PC, i See ‘unknown device’ in USB Host Controller’ On further inspection it states – Device descriptor request failed. How do i go about it? I installed the Intel USB drivers from Intel Website, but there is now a yellow exclamation mark in the same place called ‘Intel Android USB composite device.’ Can you please help me out with the flashing process ?

    Reply

Leave a Comment